Acer Aspire One Bios saving

Troubleshooting - Acer Aspire One Bios saving

Hello everybody. Today, I found out about Troubleshooting - Acer Aspire One Bios saving. Which is very helpful in my experience so you. Acer Aspire One Bios saving

The Acer Aspire One has its own built-in Bios rescue routine, allowing it potential to flash the Bios even when the principles doesn't boot anymore. It's feature meant only for emergencies it may void your warranty, so use at your own risk.

What I said. It is not in conclusion that the actual about Troubleshooting. You check this out article for facts about that wish to know is Troubleshooting.

Troubleshooting

Execute every step carefully!

Step 1 :

Format an Usb stick with Fat file system.

Step 2 :

Download the newest Aspire one Bios, then put both Bios and the Flashit.Exe software file in the root directory of the Usb stick.

Step 3 :

Important, rename the Bios file to Zg5Ia32.Fd and do not take off the Usb stick.

Step 4 :

Turn off the A1 and make sure both battery and Ac adapter are connected.

Press the Fn+Esc key, keep it pressed and push the power button to turn the Aspire 1 on.

Release the Fn+Esc key you will see after a few seconds, the power button blinking.

Push the power button once at this time the acer One will now embark on the Bios flash, do not interrupt it under any circumstances.

Wait until the power button stop blinking, the Aa1 will reboot shortly after. Wait patiently.

Now the Bios has been flashed so all settings reset to default.

If for any infer you made a mistake during the procedure let it unable to reboot by itself wait 5 minutes before turning it off( just to be safe that it isn't still flashing the Bios).

Bonus :

I would for real advise u to disconnect !!all!! Usb devices, especially storage class, from your netbook before doing a reboot.

You can find more solutions  at http://www.laptop-support.net

I hope you will get new knowledge about Troubleshooting. Where you'll be able to put to used in your evryday life. And above all, your reaction is passed about Troubleshooting.

0 comments:

Post a Comment